Hardware Preparation and Installation
2.1
Environmental and Power Requirements
2.1.1
Environmental Requirements
The following tables list the environmental requirements that NITX-300-ET-DVI board must
meet when operated in your particular system configuration.
Operating temperatures refer to the temperature of the air circulating around the board and
not to the component temperature.
Product Damage
High humidity and condensation on surfaces cause short circuits.
Do not operate the system outside the specified environmental limits. Make sure the
product is completely dry and there is no moisture on any surface before applying power.
Table 2-1 Environmental Requirements of NITX-300-ET-DVI
Requirement
Cooling Method
Temp Cycle Class
Temperature
Humidity
Vibration
Shock
Altitude
NITX-300-ET-DVI Installation and Use (6806800N97A)
Operating
Fanless
-40-+85C:500cyc
-40 °C to +85 °C
10-90% (non-condensing)
.01 g^2/Hz @ 5-500Hz
20g 11ms sine or saw
-60 - 4000 m ASL
Chapter 2
Non-Operating
-40 °C to +85 °C
21