4.12 I2C Serial Interface And Devices - Emerson NITX-300-ET-DVI Installation And Use Manual

Functional Description
Priority control by each message object
Programmable FIFO mode (concatenation of message objects)
Maskable interrupt (bus-off/error warning/reception completion/transmission
completion)
Detection/identification of bit error/stuff error/CRC error/form error/acknowledge error
Programmable loop-back mode for self-test operation
Disabled Automatic Retransmission (DAR) mode for time triggered CAN applications
For more information, see

4.12 I2C Serial Interface and Devices

There is one I2C compatible SMbus on the TNC. The following devices connect to the SMbus:
Trusted Platform Module (TPM)
One 1x PCI-E slot
One Mini PCI-E slot
Temperature sensor EMC2103
52
Table 3-9 on page 38.
NITX-300-ET-DVI Installation and Use (6806800N97A)