Figure 2-5 Slim Lite Ssd (Mo-297) - Emerson NITX-300-ET-DVI Installation And Use Manual

Hardware Preparation and Installation
Use three M1.6x3.5mm screws and three M1.6x6.0mm standoffs (0.09 Nm of
torque is recommended) to fasten the Slim Lite SSD (MO-297) to the NITX-300-ET-
DVI board.
Figure 2-5 Slim Lite SSD (MO-297)
31
NITX-300-ET-DVI Installation and Use (6806800N97A)