Table 5-11 Lm80 H/W Monitor; Table 5-12 Emc2103 H/W Monitor - Emerson NITX-300-ET-DVI Installation And Use Manual

Table 5-10 USB Configuration (continued)
Field
Legacy USB Support
EHCI Hand-off
Mass Storage Devices:

Table 5-11 LM80 H/W Monitor

Field
CPU_VCORE
VCC0_89
VCC1_05
VCC1_2
VCC1_8
VCC3_3
VCC5

Table 5-12 EMC2103 H/W Monitor

Field
CPU Temperature
Board Temperature
CPU Fan Speed
CPU Fan Duty Cycle
Automatic Fan Control
NITX-300-ET-DVI Installation and Use (6806800N97A)
Description
Enables Legacy USB support. AUTO option disables legacy support
if no USB devices are connected. Disable option will keep USB
devices available only for EFI application. Default is "Enabled".
This is a workaround for OSes without EHCI hand-off support. The
EHCI ownership change should be claimed by EHCI driver. Default
is "Enabled".
List the attached Mass Storage Devices.
Description
Monitor the CPU VCORE voltage
Monitor the VCC 0.89V
Monitor the VCC 1.05V
Monitor the VCC 1.2V
Monitor the VCC 1.8V
Monitor the VCC 3.3V
Monitor the VCC 5V
Description
CPU Temperature
Board Temperature
CPU Fan Speed
CPU Fan Duty Cycle
Enable/Disable automatic fan control in the EMC2103. Default is
"Enabled".
BIOS
67