Emerson NITX-300-ET-DVI Installation And Use Manual page 16

Introduction
Table 1-1 Key Features of the NITX-300-ET-DVI (continued)
Function
SATA
MicroSD Card
USB
Ethernet
RS232
Controller Area Network
(CAN) bus
Video
Audio
Watchdog
Form factor
OS
Temperature
16
Features
One internal SATA connector (7-pin)
One standard 22 (15power+7signal) pins SATA connector for JEDEC
MOS-297A internal slim lite SDD application
One Micro SD card slot
Two Hi-Speed USB 2.0 interfaces to USB 2.0 Type A connectors
accessible in the back-panel I/O region
Four Hi-Speed USB 2.0 interfaces to two 9-pin dual-USB headers,
one is optionally connecting mini PCI-E slot
One USB client port on an internal header
Supports 10/100/1000 Ethernet based on Marvell 88E1111
One full signal (8-wire) COM through RS-232 transceiver to header
Three UART (2-wire) through RS-232 transceiver to one internal
header
One set of CAN bus on one 4-pin internal header
One single-channel LVDS 20-pin header
One DVI port derived from the SDVO port
One High Definition Audio (HDA) codec with one Line-in, one Line-
out port
One integrated watchdog with sepectable options from
approximately 1 minute to 10 minutes
Nano-ITX , 120 mm X 120 mm form factor
Supports Microsoft Windows XP Professional
Supports Windows Embedded Standard 7
Supports Windows Embedded Standard 2009
Supports Timesys Fedora 14
-40 °C to +85 °C
NITX-300-ET-DVI Installation and Use (6806800N97A)