Maintenance - Valor H3 Series Installation Manual

7.
Place the top panel resting it on the installed left
and rear panels.
8.
Install the right hand panel assembly. If this is
diffi cult, you may remove the right hand top clip if
you need room to move the panels.
9.
Center the top panel over both sides and rear
panels.
Because our policy is one of constant development and improvement, details may vary slightly from those given in this
publication.
Designed and Manufactured by / for
Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfi replaces.com
10.
Replace the burner cover platform, and fasten
down all three screws.
11.
Tighten down the side panel anchor screws.

Maintenance

To clean the glass panels
household glass cleaner. To clean the fi ller panels use
a soft brush.
ATTENTION: DO NOT CLEAN THE FRONT GLASS
WINDOW PANE OF THE FIREPLACE WITH
AMMONIA!
See the fi replace instruction manuals for information
on how to clean the fi replace glass window.
liners , use standard
3