Advertisement
Pro2 Hotend Installation Instruction
STEP 10: Bed positioning
•
Loosen the Z thumbscrew by rotating it counter clockwise 1 full rotation.
•
Power on your unit.
Cooling fans will not be attached by this stage. Exercise caution when operating around
spinning parts.
•
In the Home tab of the touchscreen, select the Left nozzle, and set the temperature to 180. This
will ensure that the left nozzle is enabled and in the proper position.
•
In the Utilities tab, select the Z-Axis Home button to move the bed into the origin position.
WWW.RAISE3D.COM
AMERICA · ASIA · EUROPE
Advertisement
