Table of Contents
Advertisement
VDSL CO(POINT TO POINT)
1. The RJ-11 port support 4/1,5/10/15 Mbps connections. When
inserting a RJ-11 plug, be sure the tab on the plug clicks into
position to ensure that it is properly seated.
2. Do not plug a RJ-11 phone jack connector into the Ethernet port
(RJ-45 port). This may damage the converter Instead; use only
twisted-pair cables with RJ-45 connectors that conform to Ethernet
standard.
Notes:
1. Be sure each twisted-pair cable (RJ-45) does not exceeds 100
meters (333 feet).
2.
RJ-11 port use 24 ~ 26 gauge phone wiring, we do not
recommend 28 gauge or above.
3. We advise using Category 3,4,5 cable for Cable
Modem or Router connections to avoid any confusion or
inconvenience in the future when you upgrade attached
to high bandwidth devices.
8
USER'S MANUAL A.9
Advertisement
Table of Contents
