Table of Contents
Advertisement
VDSL CO(POINT TO POINT)
USER'S MANUAL A.9
4.3.4 Error - Hardware does not respond
If on startup the an error is reported by the pop up box shown in
Figure 4.9
please proceed as follows:
1. Make sure that the serial connection between modem and PC is ok.
2. Make sure that the modem is connected to the adjusted COM port
3. Reset the modem by pressing the on-board reset button.
4. Press 'RETRY
Figure 4.9 Error Message - Hardware does not respond
4.3.5 Error - COM port not accessible
If the software indicates that the selected COM port is not accessible (see
Figure
4.10) please make sure that no other application (e.g. yperTerminal)
accesses the selected COM port.
If the error message still occurs it is recommended to reboot the PC. In this
case the PC resources are corrupted.
4.4 Menus
Figure 4.10 Error Message - COM Port not accessible
24
Advertisement
Table of Contents
