VDSL CO(POINT TO POINT)
Rear Panel
The following figure shows the rear connectors
Table Converter Rear Connectors
Connectors
Line
Phone
Ethernet
Left side view
The following figure shows the left side connectors. You can adjust
VDSL Speed and Monitor VDSL status from console
Table Converter Rear Connectors:
Connector
Console port
Power On
1. Check the adapter is properly connected.
2. Verify the power LED is steadily on.
Figure Chapter 2.3 Rear Connectors
For connecting to the VDSL Modem Using a
RJ-11 cable
For connecting to the telephone or Fax
、 ISDN modem
For connecting to a Ethernet equipped device
Figure Chapter 2.4 Left side Connector
For connecting to PC with RS-232 serial port
over a RJ-45 To D-SUB Cable
Description
Description
10
USER'S MANUAL A.9
Type
RJ-11
RJ-11
RJ-45
(see chapter
Type
RJ-45
4).