Table of Contents
Advertisement
VDSL CO(POINT TO POINT)
The following functions are available within the Link Configuration page:
• Customized Settings(Not Release): If this option is selected, the user
has access to the whole bandwidth of adjustable constellations and
interpolations as well as the carrier frequencies. So he can easily find the
appropriate line rate for his special application.
• Use Recommendations: In this option the user can select a couple of
approved constellations, interpolations and carrier frequencies to change
the line rate of the modem.
We support the following modes:
4/1 M asymmetrical rate (up to 1900 meters)
5 M symmetrical rate (up to 1500 meters)
10 M symmetrical rate (up to 1200 meters)
15 M symmetrical rate (up to 1000 meters)
Change Speed procedures:
a. Connecting both VDSL CO and VDSL CPE.
b. Make sure VDSL CO has already connected to VDSL CPE,
please check both VDSL LEDs are light up.
c. Select the Upstream and Downstream speed mode (4/1M, 5 M /
10 M / 15 M)
d. Click "Write & Update" to confirm the settings
e. The VDSL port LED will be link down temporarily about 30~60
seconds.
Then the VDSL link LED will be re-linked up. It means that the
f.
new speed mode has been changed successfully.
Note. Manufacturing default threshold is on 10Mbps mode.
• Line Rate Throughput:
4/1M Line Rate= 4.17/1.56 Mbps
5M Line Rate= 6.25 Mbps
10M Line Rate=12.5 Mbps
15M Line Rate=16.67 Mbps
15
USER'S MANUAL A.9
Advertisement
Table of Contents
