Table of Contents
Advertisement
VDSL CO(POINT TO POINT)
USER'S MANUAL A.9
4.4.1 File Menu
The file Menu provides two possible selections:
• Save current configuration: The software reads the configuration
registers from current address (read address) and saves it as ASCII file
with selectable name. A file header informs about the modem type.
Configuration files for NT modems are saved with postfix .NT and for LT
modems with postfix .LT.
• Load configuration from file: The software loads a given configuration
file and checks the file header. If it does not match with modem type a
responding message box is shown. If the header matches the configuration
file is loaded to the modem and the modem is restart with the new
configuration settings.
Configuration File Example
The following file describes a LT modem. The address 0x8C59 contains the
value 0x00, the address 8C5A the value 0x00 etc.:
LT
8C59:00
8C5A:00
8C5B:00
8C40:00
8C41:00
8C42:00
8C43:00
8C44:00
4.4.2 Window Menu
• General: Opens the General page.
• Link Configuration: Opens the Link Configuration page.
• VDSL PHY Status: Opens the VDSL PHY Status page.
• Ethernet Status: Opens the Ethernet Status page
25
Advertisement
Table of Contents
