Connecting The Rj-11/Rj-45 Ports - Dynamix VC-M User Manual

VDSL CO(POINT TO POINT)

Connecting the RJ-11/RJ-45 Ports

1. The Converter's RJ-11 ports support the transmission of data up
to 4/1, 5/10/15Mbps across existing phone wiring, without
interfering with standard voice transmissions, easy-to-use does
not require the installation of any additional wiring. Every RJ-11
modular phone jack in the home can become a port on the LAN.
Networking devices can be installed on a single telephone wire
that can span within 1.9/1.5/1.2/1km (depend on speed) between
the two farthest points. (Figure 1.0).
2. VDSL CO Converter has embedded Splitter between every
VDSL side (Line) and POTS (Phone) side. It permit you can
delivers broadband service on the same lines as Plain Old
Telephone Service (POTS), PBX, ISDN traffic and VDSL Signal.
Figure 1.0 VDSL Point to Point application
7
USER'S MANUAL A.9