VDSL CO(POINT TO POINT)
USER'S MANUAL A.9
4.3 Additional Dialogs
4.3.1 Terminal Window
On the terminal every access to serial interface is shown. The terminal
window (see
Figure
4.7) is always available and can be used to control
exactly read and write accesses.
Note: This feature is only recommended for the experienced user, since
wrong settings may cause malfunction of the unit!
Figure 4.7 Terminal Windo
The following functions are available within the terminal window:
• Send: Sends the ASCII command in upper text field to the hardware. The
terminal only supports the following commands (also in lower case). For
some examples please refer to .
RD 8C**
RD 8C** *
WR 8C** **
OR 8C** **
ND 8C** **
• Clear: Clears the terminal display buffer.
• Start Logging: Saves the current terminal session to file.
• Close: Closes Terminal Window
22