Status - Keysight Technologies InfiniiVision DSOX1204A Programmer's Manual

6
Root (:) Commands

:STATus

Query Syntax
:STATus? <source>
<source> ::= {CHANnel<n> | FUNCtion | MATH | SBUS{1} | FFT
<n> ::= 1 to (# analog channels) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :STATus? query reports whether the channel, function, or serial decode bus
specified by <source> is displayed.
MATH is an alias for FUNCtion.
N OTE
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also •
•
•
•
•
•
162
(see page 798)
| WMEMory<r> | ABUS}
"Introduction to Root (:) Commands"
":BLANk" on page 142
":CHANnel<n>:DISPlay"
":FUNCtion:DISPlay" on page 292
":WMEMory<r>:DISPlay"
":VIEW" on page 165
on page 135
on page 207
on page 704
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide