Mtest:average - Keysight Technologies InfiniiVision DSOX1204A Programmer's Manual

:MTESt:AVERage

Command Syntax
:MTESt:AVERage <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :MTESt:AVERage command enables or disables averaging. When ON, the
oscilloscope acquires multiple data values for each time bucket, and averages
them. When OFF, averaging is disabled. To set the number of averages, use the
:MTESt:AVERage:COUNt command described next.
The :MTESt:AVERage command is obsolete and is provided for backward compatibility to
N OTE
previous oscilloscopes. Use the :ACQuire:TYPE AVERage command (see
Query Syntax
:MTESt:AVERage?
The :MTESt:AVERage? query returns the current setting for averaging.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also •
•
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
(see page 798)
"Introduction to :MTESt Commands"
":MTESt:AVERage:COUNt"
Obsolete and Discontinued Commands
on page 401
on page 746
31
page 189) instead.
745