Veeder-Root VaporTEK Installation, Setup And Troubleshooting Manual page 39

Communication Setup - VaporTEK Interface
1. On your laptop, go to Start > All Programs > Accessories> Communications >HyperTerminal.
HyperTerminal" is an inbuilt program for Windows XP and earlier operating systems. It is not
readily available on Windows 7 and needs to be downloaded from the Internet. Also, a non-
commercial program like "M16 –Terminal" can be downloaded and used instead of HyperTer-
minal.
Once the HyperTerminal menu screen appears, click on 'File' in the menu bar and select 'New Connection'.
2. In the Connection Description dialog box Name field, enter 'VaporTEKClick 'OK' (see example below).
3. Select the appropriate COM port on your laptop (COM X in example below). To verify COM port, go to
Control Panel/System/Device Manager and select ports. Check to see which COM port says USB 2.0. Click
'OK'.
Connection Description
New Connection
Enter a name and choose an icon for the connection:
Name:
VaporTEK Controller
Icon:
OK
Connect To
VaporTEK
Enter details for the phone number that you want to dial:
Enter details for the phone number that you want to dial:
Country/region:
Country/region:
Enter the area code without the long-distance prefix.
Enter the area code without the long-distance prefix.
Area code:
Area code:
Phone number:
Phone number:
Connect using:
COM X
Configure...
Detect Carrier Loss
Use country/region code and area code
Use country/region code and area code
Redial on busy
Redial on busy
OK
35
? X
Cancel
? X
Cancel
Setup with Laptop