Regulatory Notices; Notice For North America (Fcc And Ices) - Broadcom Emulex LPe12000 Series Installation Manual

Emulex LPe12000-Series Host Bus Adapters Installation Guide
Table 6: LPe12000-Series Adapter Specifications (Continued)
Parameter
Agency approvals

3.2 Regulatory Notices

You can download the regulatory notices and certificates for the LPe12000-series adapters at
www.broadcom.com/emulex-regulatory.

3.2.1 Notice for North America (FCC and ICES)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Responsible party:
Jeff Hoogenboom, VP and General Manager of ECD
Emulex Corporation c/o Broadcom Inc, (408) 433-8000
1320 Ridder Park Drive, San Jose, CA 95131 USA
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense. Shielded cables
must be used between this equipment and attached peripheral devices. The reader is cautioned that changes or
modifications made to the equipment not expressly approved by Emulex could void the user's authority to operate
this equipment.
This class A digital apparatus meets all requirements of the ISED (formerly Industry Canada) Interference-Causing
Equipment Standard (ICES-003). CAN ICES-3 (A)/NMB-3(A)
Broadcom
Range
Class 1 Laser Product per DHHS 21CFR (J) & EN60825-1 when equipped with approved optical devices

UL recognized to UL 62368-1:2014

cUR recognized to CAN/CSA 22.2, No. 62368-1-14

FCC Rules, Part 15, Class A

Industry Canada, ICES-003, Class A

EMC Directive 2004/108/EC (CE Mark)

EN55032:2012, Class A
EN55024:2010
Australian EMC Framework (C-Tick Mark)

AS/NZS CISPR32:2015, Class A
Japan VCCI, Class A

Taiwan BSMI (CNS 13438), RoHS (CNS 15663), Class A

Korea MSIP, Class A

RoHS Compliant (Directive 2011/65/EU)

China RoHS compliant

LPe-120XX-IG124-100
12