Step 1: Mount Outside Antenna - SureCall BOOSTRV User Manual

Step 1: Mount Outside Antenna

Before you begin, please note that your installation may require the use of a mast or RV mounting
system on which to mount the outside antenna. One has not been provided and may be obtained by a
3rd party.
Select a location for the outside antenna that is above the roofline. The outside antenna is omni-
directional, which receives and sends signals in a 360º radius. For maximum performance, mount the
antenna at the highest possible location outside
the vehicle and in an upright position. This can
be accomplished by utilizing either the included
pole or surface-mount antenna mounting
hardware. Ensure that the mounting area has at
least a 12-inch radius clear of obstructions and
other radiating elements.
Note: The outside antenna must not be collocated or
operating with any other antenna or booster.
Maximum height restriction is 31 feet 9 inches
(10 meters) above ground.
1. Assemble the L-Bracket with U-bolts, brackets, nuts and washers and secure to mast as shown in
the illustration.
2. Secure antenna to the horizontal plate of L-Bracket using
screws.
Step 1: Mount Outside Antenna
www.SureCall.com | 1-888-365-6283 | support@surecall.com
Possible Antenna Locations
Screws
U-Bolt
L-Bracket
Anchors /
Sleeves
mounting
surface
Omni Antenna
5