Power-Up And Initialization Led Codes; Power-Up And Initialization Led Codes (1111 Xxxx - Digital Equipment VAXstation 4000/60 Condensed Service Information

B.3 Power-Up and Initialization LED Codes
Table B–1 lists the system power-up and initialization LED codes.
Table B–1 Power-Up and Initialization LED Codes (1111 XXXX)
LED
3
LED Depiction Code
1111 1111 FFh
1111 1110 FEh
1111 1101 FDh
1111 1100 FCh
1111 1011 FBh
1111 1010 FAh
1111 1001 F9h
1111 1000 F8h
1111 0111 F7h
1111 0110 F6h
1111 0101 F5h
1111 0100 F4h
1111 0011 F3h
3
In this column, 1 indicates the LED is on; 0 indicates the LED is off.
Description
Power has been applied but no
instruction has been run
ROM has been entered and initializa-
tion and testing have started
Waiting for memory to initialize
Sizing memory in the system
Running a byte mask test on the
memory needed by the console
A full memory data path test is being
performed on the memory needed by
the console
Initializing the console data structures
Performing auto configuration on the
machine
Testing the NVR device
Testing the DZ device
Testing the graphics output device
Initializing the console device
Entering the console program
FRU
System module
System module
System module, memory
modules
System module, memory
modules
System module, memory
modules
System module, memory
modules
System module
System module
System module
System module, mouse,
keyboard
System module, graphics
module
System module, graphics
module
System module
Reading the Diagnostic LED Codes B–3