FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-22 Cabinet rear
Step 9 Reinstall the ground cables, front and rear doors, side panels, and door status sensor.
Step 10 (Optional) If multiple cabinets are installed, combine the cabinets.
1.
2.
3.
Issue 07 (2019-12-20)
Level adjacent cabinets.
Remove the screws that securing connecting kits from the cabinet, take off the
connecting kits, and properly store the removed screws.
Combine the cabinets by installing the connecting kits at the combination positions on
the front and rear doors of the cabinets with screws.
Copyright © Huawei Technologies Co., Ltd.
2 Installation
42