FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-5 42 U four-cabinet scenario (front view)
Table 2-7 Components in the 42 U four-cabinet scenario
No.
(1)
(2)
Issue 07 (2019-12-20)
For details on the converged cabinet, see the single cabinet scenario.
In the two-cabinet scenario (one converged cabinet and one battery cabinet), a standalone AI/DI
module can be installed in the 42 U position on the top of rear side of the battery cabinet.
In a scenario with both the network cabinet and battery cabinet, first install a standalone AI/DI
module in the 42 U position on the top of the rear side of the network cabinet.
The battery pack is not configured for the converged cabinet when batteries have been configured.
Component
Camera (optional)
(Optional) T/H
sensor
NOTE
Copyright © Huawei Technologies Co., Ltd.
Installed Onsite
Required
Required
For an 800 mm
wide network
cabinet, install
the T/H sensor on
the left side of the
network cabinet.
For a 600 mm
wide network
cabinet, install
the T/H sensor on
the top of the
2 Installation
Cables Connected
Onsite
Required
Required
26