Huawei FusionModule500 User Manual page 129

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Step 2 For details about how to commission the camera and set parameters, see the documents
delivered with the device or the documents obtained by referring to the "Preparing
Documentation" section.
1.
2.
3.
4.
Issue 07 (2019-12-20)
Preview the site situation in real time and check the camera coverage through videos.
Adjust the lens if necessary.
Set IP address, Subnet mask, and Gateway IP address to the planned values.
Figure 3-7 Basic camera configuration
Format the SD card.
a. Choose Configuration > System Configuration > Storage Management.
b. The Storage Management page is displayed. Format the SD card.
Figure 3-8 Formatting the SD card
Set the camera stream type and primary stream parameters.
Copyright © Huawei Technologies Co., Ltd.
3 Commissioning Guide
120