Huawei FusionModule500 User Manual page 39

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-8 Inserting rubber plugs
Step 6 (Optional) Combine cabinets.
1.
When adjusting the height of a cabinet, rotate the four anchor bolts for the same number of
rounds to ensure that the cabinet itself is level.
2.
3.
Issue 07 (2019-12-20)
Level adjacent cabinets. Adjust the anchor bolts of other cabinets based on a leveled
cabinet and ensure that adjacent cabinets are of the same height.
Remove the screws that securing connecting kits from the cabinet, take off the
connecting kits, and properly store the removed screws.
Combine the cabinets by installing the connecting kits at the combination positions on
the front and rear doors of the cabinets with screws.
Copyright © Huawei Technologies Co., Ltd.
2 Installation
30