Audio Settings; Storing Fm Stations In A Storage Location; Accessing Fm Stations In A Storage Location; Overwriting/Deleting A Stored Station Location - TechniSat DIGITRADIO 1 Instruction Manual

8.6

Audio settings

> Press the MENU button and use the t or u buttons to select the [Audio
Settings] submenu.
> Press the OK button.
> In the event of weak FM reception, use t or u to select the [Stereo Possible]
or [Mono Only] entry to play in stereo (only available via headphones) or in
mono only.
> Confirm by pressing the OK button.
8.7

Storing FM stations in a storage location

The programme memory can store up to 20 stations in the FM/VHF range.
> First set the station frequency you want (Sections 8.3, 8.4).
> To save this station to a storage location, hold the FAV button down while the
station is playing. Then use the t and u buttons to select a station storage
location (1 - 20). Press the OK button to save it.
> Repeat the process to save more stations.
48
The station stored in FAV storage location 1 can also be accessed via the direct
selection button.
8.8

Accessing FM stations in a storage location

> To access a station that you have already saved in the FAV memory, briefly
press the FAV button and use the t and u buttons to select a station storage
location (1 - 20). Press the OK button to play the station.
If no station has been saved to the selected storage location, [(none)] appears
in the display.
8.9

Overwriting/deleting a stored station location

> Simply save a new station to the relevant storage location as described.
If factory settings are applied, all storage locations will be deleted.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
49