Table of Contents
Advertisement
INSTRUCTION MANUAL
61
_____________________________________________________________________________________________________________________
18.16 Paperweight calculation (PAP)
This function enables to calculate paperweight
5
of 1m
of paper basing on samples of known
2
0
area. For quick access, the function is
accessible directly by pressing MENU key.
g
The balance must be tared just before the
measurement.
Place the specific sample quantity of the same
area (possible values: 1, 2, 5, 10, 20, 50, 100).
Press MENU key to access Function Menu. To
enter the function press
T
key when PAPEr
is displayed.
Following options show on the display:
- PAP oFF – turn off the function,
- PAP on – turn on,
- PAP n – inscribing number of paper pieces on
pan,
- PAP ArE – inscribing surface of single piece (in
m
2)
Press
T
key when PAP n and PAP ArE is
displayed.
Enter number of samples using:
0
-increasing digit,
T
- next digit,
MENU – end of inscribing.
Press
T
key when PAP ArE is displayed.
Enter area of a single sample (as above).
The result of paperweight measurement is
finished with „o" mark pointing g/m
unit.
2
In order to finish work with function press MENU
and then using
T
key choose PAPEr and
PAP oFF
Note:
"PAP Err" communicate marks that wrong
values were inscribed in PAP n or PAP ArE.
Advertisement
Table of Contents
