Table of Contents
Advertisement
_____________________________________________________________________________________________________________________
17.6 Setting backlight function (b_LIGHt)
0
INSTRUCTION MANUAL
The function is used for choosing the work mode of
scale display backlight:
kg
- b_L OFF – switch backlight off,
- b_L on – switch backlight permanently on,
- b_L ECO – switch off after 30 seconds of inactivity
(no load changes and no key operation),
- b_L bAt – like above, but when powering from
accumulators only,
- out – out without changes.
Switching backlight off causes decrease of energy
consumption by the scale, what is important during
powering from accumulators.
33
Advertisement
Table of Contents
