Table of Contents
Advertisement
30
_____________________________________________________________________________________________________________________
17.4 Serial port parameters setting (SErIAL)
0
In order to set needed parameters choose SErIAL function, select appropriate parameter and press
key when required option or parameter value is displayed.
In scales with an additional serial port appear Port-1 and Port-2, for the independent setting of both ports.
INSTRUCTION MANUAL
kg
- transfer protocol (Prot):
- baud rate (bAud): (4800, 9600, ....115 200bps),
- number of bits in single char. (bitS): 7, 8,
- parity control (PArItY):
Even – parity control,
- scale number in network (nr):
- transmission through serial interface (SendInG) :
The
function
allows
communication parameters of both of serial ports
Port-1 and Port-2 (executed in RS232C, RS485,
USB or LAN standard):
LonG – cooperation with printer or computer,
EPL – cooperation with label printer in normal mode
(activates LAbEL function),
EPL_A – cooperation with label printer in automatic
mode (activates LAbEL function),
EPL_d – cooperation with special label printers,
Pen-01 – cooperation with PEN-01,
SCAnn – cooperation with MJ-4209 barcode
readers.
nonE – no control
Odd –nonparity
(if the scale doesn't work in network the number
must be 0),
StAb – transmission after
result is stable,
noStAb – transmission after
without need of stabilisation,
Auto - automatic transmission after load is put on
and result is stable (Auto),
Cont - continuous transmission, about 10 results
per second (Cont.),
Remove - trans
Default parameter values:
Long, 9600 bps, 8 bits, none, StAb
setting
independently
key is used and
key is pressed
T
Advertisement
Table of Contents
