Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Axis AKA/G Series
Summary of Contents for Axis AKA/G Series
- Page 1 USER MANUAL AKA/G SERIES File: 2017-10-27 AKA_G AKAG122 GB...
-
Page 2: Table Of Contents
USER MANUAL ____________________________________________________________________________________________________________________ Contents: 1. General description .................................. 3 2. Set ....................................3 3. Safety rules ....................................4 4. Technical data ..................................5 5. General balance description ..............................6 6. Keys and indicators .................................. 8 7. Preparing working environment ..............................9 8. -
Page 3: General Description
- protective seals placed on: an edge of balance name plate, the casing mounting screw and in the place of access to adjustment switch, In order to renew legal verification please contact authorized service of AXIS. Balance classification according to PKWiU: 33.20.31. -
Page 4: Safety Rules
USER MANUAL ____________________________________________________________________________________________________________________ 3. Safety rules It is necessary to follow safety rules of work with the balance shown below. Obeying those rules is the condition to avoid electrical shock or damage of the balance or connected peripheral devices. Repairs and necessary regulations can be done by authorised personnel only. -
Page 5: Technical Data
USER MANUAL ____________________________________________________________________________________________________________________ 4. Technical data AKA120G AKA220G AKA320G AKA520G Type AKZ120G AKZ220G AKZ320G AKZ520G Capacity (Max) 120g 220g 320g 520g Min load (Min) 0,02g 0,02g 0,02g 0,02g Reading unit (d) 0,001g 0,001g 0,001g 0,001g Verification unit (e) 0,01g 0,01g 0,01g 0,01g Tare range... -
Page 6: General Balance Description
USER MANUAL ____________________________________________________________________________________________________________________ 5. General balance description view: AKA100G-AKA520G, AKZ100G-AKZ520G 1 – pan 2 – pan support 3 – pan ring 4 – graphical display 5 – keys 6 – rotating legs 7 – level 8 – draft shield AKA1200G-AKA4200G, AKZ1200G-AKZ10G: 1 –... - Page 7 USER MANUAL ____________________________________________________________________________________________________________________ Printer Keyboard Feeder or computer ~230V/50Hz (option) Feeder Adjustment RS232C switch Clock RxD (receiver) TxD (transmitter) Data Case...
-
Page 8: Keys And Indicators
USER MANUAL ____________________________________________________________________________________________________________________ 6. Keys and indicators Max 200g Min 0.01g e=0.001g d=0.0001g 100% - taring (enter mass subtracted from weighed mass) - zeroing (option), ENTER - confirmation / choosing an option, - decimal point, 1/F1 ... 5/F5 - numeric key / functional key, ... -
Page 9: Preparing Working Environment
USER MANUAL ____________________________________________________________________________________________________________________ 7. Preparing working environment +33°C +18°C Location for the balance should be chosen with care in order to limit influence of the factors that can interrupt working balance. This location has to maintain proper temperature for working balance and necessary space for its operating. -
Page 10: Preparing Balance To Work
USER MANUAL ____________________________________________________________________________________________________________________ 8. Preparing balance to work 1. Take the balance, the feeder and mechanical elements of the pan out. It is recommended to keep the original scale package in order to transport the balance safely in future. 2. Place the balance on a stable ground not affected by mechanical vibrations and airflows. -
Page 11: General Operation Principles
USER MANUAL ____________________________________________________________________________________________________________________ 9. General operation principles Do not overload the balance more than 20% of maximum capacity. Do not press the pan with a hand. For transportation take off the pan (move it gently and lift it up) and pan support (lift it up) and protect from any damages. -
Page 12: Start-Up
____________________________________________________________________________________________________________________ 10. Start-up Plug feeder into 230V power supply socket and feeder output connector into 12V socket at back of the balance. After switching-on, the balance displays AXIS logo and performs automatic self-tests. ul.Kartuska 375B 80-125 Gdańsk http//:www.axis.pl In case of test failure balance displays tests list. Lack mark means negative test result. - Page 13 USER MANUAL ____________________________________________________________________________________________________________________ Empty the pan. AUTOCALIBRATION Press key twice (double pressing the key helps to avoid accidental starting calibration procedure). Internal calibration: - confirmation) During calibration internal weight is put three times on and obtained results are compared. Discrepancy of results is signalled with a message and causes the balance being blocked.
-
Page 14: Checking The Balance
USER MANUAL ____________________________________________________________________________________________________________________ 12. Checking the balance In order to confirm correctness of the balance during its operation, before starting and after finishing every measurement series it is advised to check weighing accuracy. It can be done by weighing external calibration weight or other object with exactly known mass. - Page 15 If the scale is equipped with two serial joints (interfaces) Print and SErIAL function is set independently for both interfaces. If scale cooperates with a computer then the computer must have a special program. Dedicated programs are also offered by AXIS. Needed drivers and instructions can be found on the CD supplied with Axis scales.
-
Page 16: Menu Navigation
USER MANUAL ____________________________________________________________________________________________________________________ 14. Menu navigation Balance’s display during weighing: metrological data bar net weight indicator active autozeroing Max ... Min ... e= ... d= .. active application mark NET AUT ANL active application icon 10.1203 T 100% load bar main indication After pressing MENU key main menu shows up: Main menu consists:... -
Page 17: Setup
USER MANUAL ____________________________________________________________________________________________________________________ 15. Setup Setup consists all options used for setting balance’s way of working: MENU Menu – applications selection to user’s 1. Applications personalized menu, 2. Setup 3. Info Calibration – balance’s calibration, 4. Exit Auto-zeroing – automatic zero indication hold when pan is unloaded, Unit –... -
Page 18: Application Selection - Creating Personalized Menu
USER MANUAL ____________________________________________________________________________________________________________________ 15.1 Application selection – creating personalized menu All balances besides basic metrological functions: weighing and tare, have many applications (functions) and configuration options. In order to limit user applications quantity that SETUP appear after pressing Menu key (and choosing Applications option), user can choose several 1. -
Page 19: Calibration With External Weight / Calibration Options
USER MANUAL ____________________________________________________________________________________________________________________ 15.2 Calibration with external weight / calibration options Calibration with external weight should be performed if balance accuracy after internal calibration is not satisfactory. Calibration weight stated in technical data table for the balance (or of better accuracy) with valid verification certificate should be used then. - Page 20 USER MANUAL ____________________________________________________________________________________________________________________ In order to calibrate the balance use MENU key, choose Setup option and then Calibration. SETUP 1. Menu 2. Calibration 3. Auto-zeroing 4. Unit 5. Interface 6. Print setup 7. LCD settings 8. Language 9. Time&date 10. Keyboard 11.
- Page 21 USER MANUAL ____________________________________________________________________________________________________________________ SETUP After setting standard of mass value, prepare 1. Menu standard of mass, choose Calibration option 2. Calibration and press ENTER key. 3. Auto-zeroing 4. Unit 5. Interface 6. Print setup 7. LCD settings 8. Language 9. Time&date 10.
- Page 22 USER MANUAL ____________________________________________________________________________________________________________________ The form of ALN/G balance calibration report printout: ------------- CALIBRATION REPORT -------------- ALN220G MAX=220g e=0.001g d=0.0001g 1234 PROD.DATE: 2015-10-25 FIRM.VER.: ALNG106 2015-10-23 AD7710 SIL external standard of mass used by producer FACTORY EXT.LOAD : 200.00 g internal standard of mass weight registered by producer FACTORY INT.LOAD : 196.131 g CALIBRATION NO.
-
Page 23: Auto-Zeroing Function
USER MANUAL ____________________________________________________________________________________________________________________ 15.3 Auto-zeroing function Auto-zeroing special function ensures that balance’s indications close to zero will be corrected automatically and when the pan is unloaded zero indication will be maintained (regardless of environment conditions). SETUP To turn on the function use navigation keys and ENTER key, choose Status ON. -
Page 24: Unit Selection
USER MANUAL ____________________________________________________________________________________________________________________ 15.4 Unit selection In order to change default unit type used in balance use MENU, choose option Configuration and Units. Selection of units: SETUP - Carat (1 ct= 0,2 g), 1. Menu - Miligram (1mg=0,001g), 2. Calibration - Kilogram (1kg=1000g), 3. -
Page 25: Interface Parameters Setting
USER MANUAL ____________________________________________________________________________________________________________________ 15.5 Interface parameters setting SETUP function allows setting independently communication parameters of both of serial ports 1. Menu Port-1 and Port-2 (executed in RS232C, RS485, 2. Calibration USB or LAN standard): 3. Auto-zeroing 4. Unit - transfer protocol (Prot): 5. -
Page 26: Print Setup
USER MANUAL ____________________________________________________________________________________________________________________ 15.6 Print setup Function is used for printing additional information SETUP stored in scale memory, weighed product identification data and scale operator id. That 1. Menu information is inscribed using scale keys or 2. Calibration scanner. 3. Auto-zeroing 4. - Page 27 USER MANUAL ____________________________________________________________________________________________________________________ Sample printout during normal weighing (all printout positions deactivated): 20.07 kg 20.04 kg 20.04 kg Sample printout during normal weighing with clock option (all printout positions deactivated): 20.07 kg 2012-11-08 10:01 20.04 kg 2012-11-08 10:01 20.04 kg 2012-11-08 10:01 Sample printout during normal weighing ( some printout positions activated): AKA220G MAX=220g e=0.001g d=0.001g 30000017...
-
Page 28: Lcd Settings
USER MANUAL ____________________________________________________________________________________________________________________ 15.7 LCD settings SETUP LCD settings enable to set contrast and backlight. 1. Menu 2. Calibration Function has below options: 3. Auto-zeroing Contrast - setting LCD contrast, 4. Unit Backlight – backlight brightness, 5. Interface Negative – black background with 6. -
Page 29: Setting Date And Time
USER MANUAL ____________________________________________________________________________________________________________________ 15.9 Setting date and time SETUP Function enables setting actual time and date 1. Menu and displaying format. 2. Calibration 3. Auto-zeroing 4. Unit Options description: 5. Interface PIN – after inscribing PIN code (4 digits) 6. Print setup changing time or date won’t be possible 7. -
Page 30: Analog Output
USER MANUAL ____________________________________________________________________________________________________________________ 15.11 Analog output SETUP 1. Menu Function enables to set options regarding 2. Calibration analog out: 3. Auto-zeroing Range – weight value when the 4. Unit analog out has max value, 5. Interface Mode – falling characteristic, falling- 6. -
Page 31: Applications
USER MANUAL ____________________________________________________________________________________________________________________ Applications The balance enables to use many applications (special functions). Before using them user must create personalized menu, where he puts chosen applications (chapter 15.1). MENU In order to use applications press MENU key: 1. Applications Applications – personalized menu, 2. -
Page 32: Product And User Identification
USER MANUAL ____________________________________________________________________________________________________________________ 16.1 Product and user identification The balance enables to inscribe actual product and user identification number: - Product ID– product barcode, - User Id – user identification number. Balance product barcode and user readout together with external devices (e.g. printer, label printer and computer) enables to build simple identification and archivisation system. -
Page 33: Pieces Counting
USER MANUAL ____________________________________________________________________________________________________________________ 16.2 Pieces counting The application enables to count identical pieces, e.g. turnbuckles or buttons in weighed portion basing on calculated single unit weight in a sample. It is suggested that the single unit weight (APW) is bigger than balance’s readout value and sample weight is bigger than 100 readout units. -
Page 34: Unit
USER MANUAL ____________________________________________________________________________________________________________________ Note: APW too LOW communicate signalises that a sample was not put on the pan or if single piece weight is less than one-tenth readout plot (counting is not possible). APW LOW communicate signalizes that single piece weight is more than one-tenth but less than one readout plot. -
Page 35: Percentage
USER MANUAL ____________________________________________________________________________________________________________________ 16.4 Percentage Percent application allows displaying weighing result in percents. APPLICATIONS Applications options: Activate – inscribing actual indication as …. 100%, conversion to % indications, Percent … Shortcut - fast access key selection: F1, Exit F2,… or F5. PERCENT A measurement is performed in two phases: 1. -
Page 36: Animals Weighing
USER MANUAL ____________________________________________________________________________________________________________________ 16.5 Animals weighing The application allows weighing animal moving on the scale. APPLICATIONS …. Application options: Animal - Activate – animals weighing activation, … Exit ANIMAL - Mode: <auto> - automatic weighing after weight 1. Activate load change, 2. -
Page 37: Tare Setting
USER MANUAL ____________________________________________________________________________________________________________________ 16.6 Tare setting This function enables to measure gross weight of a sample placed in a container of a known weight value (stored in the memory) and to display calculated net weight of the sample. Tare value is recalled from the ... -
Page 38: Max Or Minimum Value Indication
USER MANUAL ____________________________________________________________________________________________________________________ 16.7 Max or minimum value indication Application enables to freeze on display maximal or minimal value. APPLICATIONS Application options: …. Activation – move to weighing with MAX / MIN MAX/MIN value indication, … Mode – maximal value (MAX) or minimal Exit (MIN), MAX / MIN... -
Page 39: Force Indication (Newton)
USER MANUAL ____________________________________________________________________________________________________________________ 16.8 Force indication (Newton) The application enables to measure balance’s pan load force. APPLICATIONS Application options: Activation – force measurement start, Shortcut - - fast access key selection: Newton F1, F2,… or F5. Exit Newton 1. Activation 2. -
Page 40: Total
USER MANUAL ____________________________________________________________________________________________________________________ 16.9 Total Application enables to sum up successive measurements and calculate average value. APPLICATIONS Application options: - Activation – start Total app, - Preview – summing register check, Total - Printout – printout on/off - Mode – adding result: Exit <Auto>... -
Page 41: Checkweighing Function (Thr)
USER MANUAL ____________________________________________________________________________________________________________________ 16.10 Checkweighing function (thr) This function allows comparing weighing result with two programmed reference values: lower and upper threshold. Comparison result is signalled with indicators (MIN, OK, MAX) and sound signal generated (in Impulse mode)when threshold values are exceeded. Standard scale is set for cooperation with optical indicator. - Page 42 USER MANUAL ____________________________________________________________________________________________________________________ Operation sequence: APPLICATIONS Application options: - Activation – move to weighing with summing, - Zero threshold – zero signalling threshold, Threshold - MIN threshold – Minimum threshold signalling, - MAX threshold – Maximum threshold signalling, Exit - Mode – working mode: <signaller>...
- Page 43 USER MANUAL ____________________________________________________________________________________________________________________ Relays WY connection diagram: SCALE RELAYS P1 (MIN thr) P2 (MAX thr) Imax < 25mA P3 (zero thr) shielding earth Relays output is the open collector transoptor output with load capacity 25mA / 24V. Transmitter inputs must be protected with diodes, e.g. 1N4148. It is advised to use MS3K/P electronic board (sold separately), consisting of RM96P transmitters, with DC24V input voltage and AC250V, 3A output.
-
Page 44: Stats
USER MANUAL ____________________________________________________________________________________________________________________ 16.11 Stats This function evaluates from series of measurements (max 1000) statistical parameters of weighting process. Adding successively measurements to register is automatic and it occur after the scale is loaded and its indications stabilize. After each loading printout is made with: number of measurements, result, date and time (if clock is installed and the function is activated). - Page 45 USER MANUAL ____________________________________________________________________________________________________________________ APPLICATIONS Applications option: - Activation – move to weighing with summing, Stats - Preview – checking summing register state, - Mode – add next result, Exit <Auto> - automatic after stabilization, <Manual> - after putting load and pressing key, STATS - Taring –...
- Page 46 USER MANUAL ____________________________________________________________________________________________________________________ Pressing key printouts estimated values and histogram : Nominal - nominal value, Tolerance - accepted value in percentage. N - number of sample IN TOL. – number of samples in toleranc -TOL – amount of measurements under allowable lower value +TOL –...
-
Page 47: Density Measurement
USER MANUAL ____________________________________________________________________________________________________________________ 16.12 Density measurement This function allows for determination of solid body density, upon the basis of weight in the air and weight of material immersed in liquid of known density, according to the formula: ρ = * ρ liquid where: -weight in air... - Page 48 USER MANUAL ____________________________________________________________________________________________________________________ APPLICATIONS Application options: - Activation – density measurement activation, Density - Preview – preview of actual summing register, - Type of material –solid or liquid, Exit DENSITY - Type of liquid – water, ethanol or other (insert density), 1.
- Page 49 USER MANUAL ____________________________________________________________________________________________________________________ Application options: - Activation – move to density measurement, DENSITY - Preview – preview of actual summing register, 1. Activation - Material type –solid body or liquid, 2. Preview 3. Material type: <Solid><Liquid> - Plunger volume –insert volume marked on 4.
- Page 50 USER MANUAL ____________________________________________________________________________________________________________________ Report printout: In order to print measurement results connect printer to scale’s RS232C interface. Way of connecting is described in chapter about scale communication. After each measurement press to printout. Printout sample: Measurement number Mass in the air Mass in the liquid Density …...
-
Page 51: Recipe
USER MANUAL _________________________________________________________________________________________________________________ 16.13 Recipe This function allows for weighing few ingredients in sequence in one vessel, with the possibility of continuous reading of summary mass value of all ingredients weighed so far. APPLICATIONS Recipe Application options: - Activation – move recipe weighing Exit... -
Page 52: Packing Goods Control (Tp)
USER MANUAL __________________________________________________________________________________________________________________ 16.14 Packing goods control (TP) Application enables to do destructive, non destructive and full control (according to polish regulations), calculating values demanded by reference method and qualification of packed goods. Application options: APPLICATIONS - Activation – activate control, - Preview –... - Page 53 USER MANUAL _________________________________________________________________________________________________________________ TP/PREVIEW F2 (Reset) key erases all measurements and starts Defective new control. Disqualifying Average : 55.78 g F1 (end) key enables instant control end and Average qual. : 50.00 g displaying results. Result : POSITIVE - printout F1-end F2–Reset CLR-exit TP/PREVIEW Using F1 (end) key before making required quantity Defective...
- Page 54 USER MANUAL __________________________________________________________________________________________________________________ Report sample (non destructive control): ----- TP (PACKAGED GOODS) ------ MODE: 20 TARE 5.00 g 50.00 g Qn - T1 = 45.50 g Qn - 2*T1 = 41.00 g 55.76 g 55.77 g 55.77 g 56.15 g 56.16 g 56.15 g 56.15 g...
-
Page 55: Detailed Information About Balance Communication
02h scale number command. To log the scale out use 03h command. For example: Using a program to test RS232 interface ( program is available on www.axis.pl in computer programs section) for scale number 1 please write: $0201 to log in, then SI, and write: $03 to close communication. - Page 56 D1...DN – threshold value (see ) Scale Computer: without response. Connecting cable WK-1 (scale – computer / 9-pin interface): SCALE COMPUTER Connecting cable WD-1 (connects printer with scale): SCALE PRINTER AXIS C-001 printer internal switches setting: SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8...
-
Page 57: Protocol Epl Description
USER MANUAL _________________________________________________________________________________________________________________ 17.2 Protocol EPL description Transmission parameters: 8 bits, 1 stop bit, no parity, baud rate 9600bps, After using key in scale: ScaleLabel printer : set of instruction in EPL-2 language that initialize label printing: - Steering instruction FR"0001"... -
Page 58: Troubleshooting And Maintenance
USER MANUAL __________________________________________________________________________________________________________________ 18. Troubleshooting and maintenance 1. The balance should be kept clean. 2. Take care that no dirt is between the casing and the pan. If a dirt is noticed, take off the pan (lift it up), clean a dirt and then mount the pan. 3.
Need help?
Do you have a question about the AKA/G Series and is the answer not in the manual?
Questions and answers