All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ Contents: 1. General description ......................................3 2. Completeness .........................................3 3. Safety rules........................................4 4. Technical data .........................................5 5. General scale view......................................6 6. Keys and indicators......................................8 7. Preparing working environment...................................9 8. Preparing scale to work ....................................10 9.
__________________________________________________________________________________________________________________ 1. General description BTA series electronic scales are destined for laboratory works which do not require high accuracy and for wide range of technical purposes as well. All scales are metrologically tested by manufacturer and are not destined for EC verification.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 3. Safety rules It is necessary to follow safety rules of work with the scale shown below. Obeying those rules is the condition to avoid electrical shock or damage of the scale or connected peripheral devices.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 4. Technical data BTA210 BTA210D BTA2100 BTA2100D Scale type Capacity (Max) 210g 210g 2100g 2100g Reading unit (d) 0,01g 0,01g/0,001g 0,1g 0,1g/0,01g Linearity 0,02g 0,003g 0,2g 0,03g Repeatability 0,02g 0,003g 0,2g 0,03g Pan dimensions...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 5. General scale view BT210(D) scale: 1 – pan 2 – pan support (under pan) 3 – pan ring (against blows) 4 – display LCD 5 – keys 6 – rotating legs 7 –...
Page 7
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ Connectors view: Feeder Printer or computer ~230V Feeder Adjustment RS232C USB (option) switching RxD (receiver) TxD (transmitter) ground case...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 6. Keys and indicators - switch on / switch off (standby), " → T ← - taring (storing package mass subtracted from weighed mass) " - showing gross mass (option), "...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 7. Preparing working environment +33°C +18°C Location for the scale should be chosen with care in order to limit influence of the factors that can interrupt working scale. This location has to maintain proper temperature for working scale and necessary space for its operating.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 8. Preparing scale to work 1. Take the scale and feeder out of the package. 2. Place the scale on a stable ground not affected by mechanical vibrations and airflows. 3.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 9. General operation principles 1. In order to confirm correctness of the scale during its operation, before starting and after finishing every valid measurement series it is recommended to check weighing accuracy putting calibration weight or other object of exactly known mass on the scale.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 10. Operation rules during work with accumulators (batteries) 1. Scale can be powered from ~230V supply through feeder attached with scale. Moreover accumulators, which are placed in container inside the scale, can be used for powering.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 11. Accumulators (batteries) replace 1. Take pan, pan support and pan ring carefully. 2. Turn the scale upside down. 3. Unscrew screws 11 holding cover 12, take cover off. 4. Take accumulator container 13 off and put 4 AA format accumulators in it. The way of placing accumulators into the container is shown on the picture above and draft in the container: Not controlled press on the pan can cause mechanical damage of...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 12. Start-up Plug feeder into ~230V power supply socket. When the pan is empty plug feeder output connector into 12V socket at back of the scale. Autotests and internal calibration will be performed. Steps after start-up of the scale: Tests of electronic scale components.
AXIS offers computer programs to cooperate with scales, available on www.axis.pl website: - Communication – free program for sending simple commands to the scale and receiving weighing results, - ProCell –...
Page 16
WK-1 connecting wire (connects the scale with a computer/9-pin connector): SCALE COMPUTER WD-1 connecting wire (connects a scale with printer): SCALE KAFKA PRINTER The settings of internal switches in printer AXIS C-001: SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 14. Basic scale functions In further part of this manual the following graphical symbols will be used to describe scale functions: put load on the pan take load off press a key when indication on the left is displayed forced change automatic change...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15. Special functions All scales, beside basic metrological functions like weighing and taring, are equipped with set of special functions. Basic set includes the following special functions: - activation of functions in menu (ACtIV), - autozeroing (AutotAr), - pieces counting (PCS), - change of mass unit (UnIt),...
Page 19
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ In further part of this manual the following graphical symbols will be used to describe scale functions: - put load on the pan - take load off press the key when indication on the left is displayed - forced change - automatic change...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.1. Customization of special functions menu (ACtIV and dEFAULt) The function allows choosing among 0.00 available special functions these, which will be displayed after pressing MENU key. It helps to avoid displaying all available functions, ACtIV what can make operation time longer.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.2. Autozeroing function (AutotAr) Switching the function on causes 0.01g zero indication is automatically MENU maintained when there is no load on the pan or zero indication was → T ← key. received by pressing AUtOtAr To switch the function on press...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.3. Pieces counting function (PCS) function allows counting identical pieces, e.g pills or buttons 12.05 g included into weighed portion. Measurement is performed in two phases: - first phase – calculating the mass of 0.00 g single item basing on a sample containing...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.4. Function for changing mass unit (UnIt) The function allows selecting weighing 1.60g unit: MENU - CarAt (1 ct= 0,2 g) - carat, - MGrAM (1mg=0,001g) milligram, - KGrAM (1kg=1000g) kilogram, UnIt - Pound (1 lb=453,592374g) English pound, - OunCE (1oz=28,349523g) - ounce,...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.5. Percent calculation functions (PErCEnt) The function allows displaying 100% 0.00 g weighing result in percent. Measurement is performed in two phases: -first phase – weighing reference mass (mass referenced to 100%), 19.07 g MENU -second phase –...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.6. Function for summing recipe ingredients (rECIPE) The function allows for separate 0.00 g MENU weighing of several ingredients in one container with the possibility of reading current sum of all weighed rECIPE ingredients.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.7. Function for calibration with external weight (CALIbr) Calibration with external weight should be performed if scale accuracy is not satisfactory. Calibration weight stated in technical data table for the scale (or of better accuracy) should be used then.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.8. Label choosing function (LAbEL) This function is used in scale with ELTRON (Port-1) data protocol. This protocol enables label printout with actual scale indication and chosen data from PrInt special function (variable data), for example date and time.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.9. Function for setting serial interface parameter (Port-1 and 2) The function allows setting the 0.00g following communication parameters MENU of serial interface: - transfer protocol (Prot): LonG – printer, computer rS-1 Eltron –...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.10. Printout configuration (PrInt) The function allows switch on/off the following positions printout: 0.00g HEAdEr – header: name, model and scale number, - Id OPEr – operator code (max 6 PrInt digits), - Prn no –...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.11. Animal weighting function (LOC) This function enables weighting moving animals. Press MENU key. 0.00g MENU → T ← When LOC is displayed press key. On display will appear in order : - LOC oFF –...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.12. Memorizing tare function (tArE) This function enables gross weight measurement of goods located in a container (we know the container weight) and then readout evaluated net weight of the goods.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.13. Maximum value indication function (UP) This function enables to display the maximum value from actual weighing series. Make sure the balance displays zero 0.00 g indication before starting MENU measurements (tare).
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.14. Force measuring function (nEWton) MENU Function activation will cause displaying results in force units (mN). Press MENU key. → T ← Using key choose Newton nEWton function and then nEW on. Attention: 1mN≈0,1019g nEW on 15.15.
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.16. Setting backlight function (b_LIGHt) The function is used for choosing the 0.00g MENU work mode of scale display backlight: - b_L OFF – switch backlight off, - b_L – switch backlight b_LIGHt...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.18. Statistical calculations function (StAt) This function evaluates from series of measurements (max 500) statistical parameters of weighting process. Adding successively measurements to register is automatic and it occur after the scale is loaded and its indications stabilize.
Page 36
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ Order of operations: Press MENU key. 0.00 g → T ← When StAt is displayed press MENU key. The following options are displayed: - StA Prn – monitoring and printout of S tAt statistical data, - StA oFF –...
Page 37
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ Pressing key printouts estimated values and histogram : Nominal - nominal value, Tolerance - accepted value in percentage, N - number of samples IN TOL. – number of samples in tolerance -TOL –...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.19. Basis weight of paper counting function (PAPEr) This function allows to count the weight of 1m sheet of paper on the basis of a sample with known surface. 0.0 g →...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.20. Charging accumulators function (bAttErY)- option bAttErY function allows switching on 0.00g MENU or off charging accumulators during work with feeder and checking their power level. The function has the following bAtterY options: - bAt OFF –...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.21. Automatic switching off function (Auto OFF) The function performs switching the 0.00g MENU scale automatically during inactivity, what allows decreasing effective energy consumption and Auto OFF making time working with accumulators longer: - AOF OFF –...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.22. Total weight function (totAL) The function enables to calculate total weight of series of measurements greater than the balance capacity. To enter the function, press MENU key → T ← and choose totAL option with 0.00 g MENU...
Page 42
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ To leave the function with clearing the adding register choose tot oFF option. When connected to a printer, the balance prints the communicate informing about clearing the register. The sample check for each measurement (depends on the settings of PrInt functions): DATE: TIME:...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.23. Date and time setting (dAtE) This function enables to set current 0.00g MENU date and time of internal balance clock and course of his use. Function has the following options: - dAt oFF –...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ 15.24. Function of comparing with preset threshold values (trESh) This function compares weighing result with two reference values: lower and upper threshold. The balance signalises comparison result with MIN, OK and MAX indicators and sound signal generated when threshold values are exceeded.
Page 45
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ Order of operations: Press MENU key and choose trESh 0.00g → T ← key. function with MENU The following options are displayed: - trESh oFF – deactivate the function, trES h - trESh on - activate the function, - trESh Prn - check current threshold values (use...
Page 46
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ Scheme for connecting the single relay to THRESHOLDS connection output Transmitter Scale P1 (próg I) P2 (próg II) P3 (zero) masa ekran The THRESHOLDS connection contains transoptor outputs of open collector type, with load capacity 50mA / 24V.
The list of authorised service centres is given in guarantee card and on www.axis.pl website. 6. Scales can be sent for repair as messenger delivery only in original package. For transportation scale pan have to be protected against accidental pressing.
Page 48
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________...
All manuals and user guides at all-guides.com USER MANUAL __________________________________________________________________________________________________________________ Declaration of Conformity AXIS Spółka z o.o. 80-125 Gdańsk, ul.Kartuska 375B confirm with all responsibility that scales BTA210(D) and BTA2100(D) marked with CE mark comply the following: 1. EN 55022:2000 standard Limits and methods of measurement of...