_____________________________________________________________________________________________________________________
9. Operation principles
1. Before each measurement the balance should be properly zeroed, which is signalled by ""
indicator. If the zero indication is not shown when the balance is unloaded, or "----" is displayed, press
the "
" key.
2. The balance enables tare setting in the whole measuring range. It is performed by pressing "
key.
3. Weighed mass should be placed in the platform centre.
Do not drop weighed objects on the platform.
Do not overload the balance over 20% of maximum load.
4. The weighing result should be read during the " " indicator lighting, which indicates the result
stabilization.
5. When there is no weighing, but the balance should be ready for operation, it may be switched off by I/
key. It causes the balance reading system deactivation end entering the standby mode. Balance turning
on is performed by pressing " I/ " key.
6. Protect the balance from dust, aggressive dusts and liquids. For cleaning purposes use water and dry it.
INSTRUCTION MANUAL
13
T
"