_____________________________________________________________________________________________________________________ - Axis 4BA/T Series User Manual

38

_____________________________________________________________________________________________________________________

Inscribing data to base
0
INSTRUCTION MANUAL
Prod and USEr options enables adding and deleting
product and user data.
For products database available options are:
- EdIt –
kg
Add – add product to database,
-
- dEL OnE – deleting single element from database
- dEL ALL – deleting all elements from database
- dAtAb – changing working mode with database (default
mode Stb):
 Stb – searching products in database and working
 LIMIt – searching through products from database;
- Prn_P – sending all products database to port.
To inscribe data use EdIt option and keys:
0 - increasing digit,
T - next dixit,
MENU – end of inscribing.
Barcode reader (connected to RS232C interface) can
also be used to inscribe data and this way it is faster
and more effective.
Each database product has following data:
- M Id – memory cel number in products database,
- Prod Id – product identification number,
- Prod bA – product barcode,
- Prod nA – product name (inscribed from PC or barcode
reader),
- APW – product unitary weight (optional),
- PtArE – product package weight (optional),
- thr LO – lower threshold (MIN value),
- thr HI – upper threshold (MAX value).
Saving inscribed product data is done by using SAVE option.
with products outside the base; if product is found
then Found communicate appears and all product
data is recalled; if there is no product in database
then no communicate appears, the scale stores
id/barcode number temporarily in memory and
enables to send it to the port (to printer/computer)
together with actual weighing result.
if product is found then Found communicate
appears and all product data is recalled; if there is
no product in database then
communicate appears.
not Found