Table of Contents
Advertisement
52
_____________________________________________________________________________________________________________________
Operation sequence:
0
INSTRUCTION MANUAL
Press MENU key and choose thr pressing
key.
kg
The following options are displayed successively:
- thr oFF – deactivate the function,
- thr on – activate the function,
- thr Prn – check last threshold values (press
key several times),
- thr CFG – choose Relays socket mode:
IMPULS – Batching mode
SIGnAL – Indication mode
Choose thr-on option using
following options for entering thresholds are
displayed:
- SEt-LO - set lower threshold value,
- SEt-HI - set upper threshold value,
- SEt-ZEr - set zero signalisation threshold.
Using
Set lower threshold value using the following keys:
0
T
MENU
Then select SEt-HI option and enter upper
threshold value.
Choosing
signalisation.
Choosing out will end inscribing thresholds.
Choosing again out will start thr function.
To change Relays socket mode use thr CFG option.
Default option is Indication.
To leave the function, press MENU key and then
choose thr and thr oFF options.
kg
out.
T
key select SEt-LO option.
- digit increase,
- decimal point,
- move to next digit,
- finish.
SEt-ZEr
option
T
T
key. The
will
enter
zero
Advertisement
Table of Contents
