Advertisement
Table of Contents
- 1 Installation Instructions
- 2 Step 2: Drill Hole 117Mm Diameter Angled Downwards 1° - 2°
- 3 Step 3: Measure Hole and Note Length
- 4 Step 8: Fold Seal Inwards, Push Grille and Seal into Tube
- 5 Step 9: Rotate Inner Tube until the Ridge Lines up with Slot
- 6 Step 14: Check All 3 Pins Are out
- 7 Step 15: Hold Duct Flange Firmly against the Wall
- Download this manual
Advertisement
Table of Contents
Related Manuals for Vent-Axia Kinetic Advance White
Summary of Contents for Vent-Axia Kinetic Advance White
-
Page 1: Installation Instructions
INTERNAL FIT WALL KIT RANGE Installation Instructions Models White Brown White with Shutter Brown with Shutter Please read these instructions carefully before commencing installation. Please retain these instructions with the product. - Page 2 Step 1 Step 4 Open box, gently slide the back-draught shutter out of the pipe (Shutter versions only). Remove folded push piece. Step 5 Step 2 Drill hole 117mm diameter angled downwards 1° - 2° all the way through wall to outside. Step 6 Step 3 Measure hole and note length, if deeper than 25cm, go to step...
- Page 3 Step 8 Step 11 Fold seal inwards, push grille and seal into tube. Push wall kit through wall. Ensure locking pins are outside wall. Check arrow is at top. Step 9 Step 12 Rotate inner tube until the ridge lines up with slot. Insert folded cardboard into duct and gently push.
- Page 4 Step 14 Step 16 Check all 3 pins are out. Using supplied screws and rawl plugs attach flange to wall. Step 17 (Shutter models only) Step 15 Hold duct flange firmly against the wall. Using the toggle pull to ...
Need help?
Do you have a question about the Kinetic Advance White and is the answer not in the manual?
Questions and answers