Table of Contents
Advertisement
Quick Links
V:\Technical\ARTWORK\Fitting & Wiring\Word Files COMPLETE\445350C.doc
Kinetic
Kinetic E MVHR
and
Kinetic Plus E MVHR
Operation & Monitoring
PLEASE RETAIN THESE INSTRUCTIONS WITH THE PRODUCT.
445350CCopyright © 2009 Vent-Axia Limited. All rights reserved.
Stock Ref. N°
443303 Kinetic E
449059 Kinetic Plus E
Advertisement
Table of Contents
Related Manuals for Vent-Axia Kinetic E MVHR
Summary of Contents for Vent-Axia Kinetic E MVHR
- Page 1 V:\Technical\ARTWORK\Fitting & Wiring\Word Files COMPLETE\445350C.doc Kinetic Kinetic E MVHR Kinetic Plus E MVHR Operation & Monitoring Stock Ref. N° 443303 Kinetic E 449059 Kinetic Plus E PLEASE RETAIN THESE INSTRUCTIONS WITH THE PRODUCT. 445350CCopyright © 2009 Vent-Axia Limited. All rights reserved.
-
Page 2: Table Of Contents
Warnings & Safety Information IMPORTANT Contents Product Description PLEASE READ THESE INSTRUCTIONS Kinetic E & Kinetic Plus E .............. 3 CAREFULLY BEFORE USING THE UNIT. Powering Up the Unit ..............5 Operation and Monitoring 1. THIS APPLIANCE IS NOT INTENDED FOR USE BY YOUNG ... -
Page 3: Product Description
Product Description Kinetic E & Kinetic Plus E The Vent-Axia Kinetic E and Kinetic Plus E Mechanical Ventilation/Heat Recovery (MVHR) are heat recovery units designed for the energy efficient ventilation of houses and similar dwellings, conforming to the latest requirements of the Building Regulations document F 2010. -
Page 4: Technical Specification
0% to 95% RH Storage Temperature -10C to +45C -10C to +45C Storage Humidity 0% to 95% RH 0% to 95% RH For all other technical details, please see the Product Catalogue or our website at www.vent-axia.com. Kinetic MVHR Operation & Monitoring... -
Page 5: Powering Up The Unit
Maintenance Powering Up the Unit Switching On 1. Switch on the power at the mains supply isolator feeding the unit and the fan motors will start. 2. N.B. If you are intending to carry out work or maintenance inside the unit, switch off the power at the mains outlet supplying the unit before you remove the covers. -
Page 6: Operation And Monitoring
Maintenance Operation and Monitoring Overview When the Kinetic E and Kinetic Plus E unit has been installed and commissioned it should require no further intervention in order to operate. External switches may be used to control switch from normal to boost. Control Unit The Control Unit is located at the front of the Kinetic E and Kinetic Plus E unit. -
Page 7: Maintenance
Maintenance Maintenance Caring for the Unit Heat recovery units, by their very nature, require regular maintenance. The Kinetic E and Kinetic Plus E have been designed to facilitate access to enable maintenance to be carried out easily. WARNING THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER SUPPLY DURING MAINTENANCE. - Page 8 Vent-Axia guarantees its products for two years from date of purchase against faulty material or workmanship. In the event of any part being found to be defective, the product will be repaired, or at the Company’s option replaced, without charge, provided that the product:- ...
Need help?
Do you have a question about the Kinetic E MVHR and is the answer not in the manual?
Questions and answers