Advertisement
Installation Procedure for the Upgrade
Option 222 License Removal Procedure
1. To start the Keysight License Manager, press Start > Keysight License
2. Right click the on the desired option and click Delete.
3. In the Select Desired Option list, click 222.
4. In the Keysight License Manager dialog box that appears, press or click
5. A message displays stating that the option removal was successful.
6. Restart the PNA Analyzer application: Press File > Exit.
7. In the Exit NA Application dialog box that opens, press OK.
Step 34.Enable Options 422
For this step, you will need a USB flash drive.
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— Refer to the license message you received from Keysight: Verify that the
— Obtain your license key file(s) for installation of this upgrade by following
— A keyboard and mouse must be connected to the network analyzer.
Option Enable Procedure
1. Locate the email(s) from Keysight which contain license file attachments.
A single license file may contain licenses for more than one instrument.
Installation Note N5245-90121
Manager > Keysight License Manager . A Keysight License Manager dialog
box will appear.
Yes to confirm delete.
analyzer's model and serial numbers match those on the license message
you received from Keysight.
the instructions on the supplied Software Entitlement Certificate.
These emails are a result of
Information" on page
"Step 1. Obtain a Keyword and Verify the
14.
35
Advertisement
