Advertisement
Installation Procedure for the Upgrade
— W34 (N5245-20019) A36 port 2 coupler to front-panel Port 2 CPLR ARM
— W94 (reuse) (N5245-20031) A41 port 2 source attenuator to front-panel
— W33 (reuse) (N5245-20010) A32 port 2 ref coupler to front-panel REF 2
— W46 (N5245-20115) REF 2 RCVR R2 IN to A27 mixer brick (R2)
— W30 (N5245-20018) A35 port 4 coupler to front-panel Port 4 CPLR ARM
— W101 (N5245-20074) Port 4 RCVR D IN to A48 port 4 receiver attenuator
— W90 (N5245-20028) A40 port 4 source attenuator to front-panel Port 4
— W45 (N5245-20021) REF 4 RCVR R4 IN to A69 3 dB pad on A28 mixer brick
— W29 (N5245-20117) A31 port 4 ref coupler to front-panel REF 4 SOURCE
Installation Note N5245-90121
Port 2 SOURCE OUT
SOURCE OUT
* Connect W46 to top R2 connector on the mixer bricks.
SOURCE OUT
(R4)
OUT
* As shown in
Figure
10, install clamp part number 1400-1334 to secure
W29
27
Advertisement
