Advertisement
Installation Procedure for the Upgrade
Figure 10
Location of Cable Clamp to Secure W29 (N5245-20117)
— W99 (N5245-20073)Port 3 RCVR C IN to A47 port 3 receiver attenuator
— W26 (N5245-20015)A34 port 3 coupler to front-panel Port 3 CPLR AR
— W86 (N5245-20027)A39 port 3 source attenuator to front-panel Port 3
— W44 (N5245-20020) REF 3 RCVR R3 IN to A28 mixer brick (R3)
— W22 (N5245-20014)A33 port 1 coupler to front-panel Port 1 CPLR ARM
— W97 (reuse) (N5245-20054)Front-panel Port 1 RCVR A IN to A46 port 1
— W82 (reuse) (N5245-20077)A38 port 1 source attenuator to front-panel
— W42 (reuse) (N5245-20007)REF 1 RCVR R1 IN to A37 reference mixer
28
SOURCE OUT
* Connect W44 to top R3 connector on the mixer bricks.
receiver attenuator
Port 1 SOURCE OUT
switch
Installation Note N5245-90121
Advertisement
