SATO CL4NX Plus Operator's Manual page 450

[Change Cutter]
Notify when the cutter unit needs to be replaced.
The setting items are as follows:
Change Cutter
Enable or disable the notification function about when the cutter unit needs to be replaced.
Cutter Life
Set the notification interval about when the cutter unit needs to be replaced.
Cutter Count
Shows the current number of cuts by the cutter.
[Change Cutter]
Enable or disable the notification function about when the cutter unit needs to be replaced.
The options are as follows:
Enabled
Enable the notification function.
450
[Notifications]