SATO CL4NX Plus Operator's Manual page 258

Hide thumbs Also See for CL4NX Plus:

Table of Contents

Set and check the IP address.

If you have selected [DHCP] in the [Mode] menu, the screen shows the IP address you received

from the DHCP server.

If you have selected [Static] in the [Mode] menu, select to set the IP address.

Set and check the subnet mask address.

If you have selected [DHCP] in the [Mode] menu, the screen shows the subnet mask address you

received from the DHCP server.

If you have selected [Static] in the [Mode] menu, select to set the subnet mask address.

Set and check the default gateway address.

If you have selected [DHCP] in the [Mode] menu, the screen shows the gateway address you

received from the DHCP server.

If you have selected [Static] in the [Mode] menu, select to set the default gateway address.

Set and check DNS server addresses.

If you have selected [Static] in the [Mode] menu, select to set and check DNS server addresses.

After doing the settings, return to the [Wi-Fi] screen by pressing the

then press the

to cancel the new settings and return to the previous settings.

When [Wi-Fi Direct] is active, [Mode], [DHCP] and [DNS] do not appear. In addition,

you cannot change [IP Address], [Netmask], or [Gateway] if [DHCP] or [Wi-Fi Direct] is

active. [DNS] cannot be changed if [Mode] is [DHCP].

Select the IP address assignment method.

The options are as follows:

button to enable the new settings. Press the