Powering Off The Product - SATO CL4NX Plus Operator's Manual

Powering Off the Product

• Do not power on or off the product, connect or disconnect the power cord while your
hands are wet. Doing so could cause an electric shock.
• Do not power off the product during operation, such as when printing or updating.
Doing so could cause a malfunction of the product.
• Do not disconnect the power cord until the powering off process is completed on the
product.
• An incorrect power on/off operation may damage the product settings. In such a case,
the product settings are reset to their default values. It is always recommended to use
the power button to allow proper shutdown of the product and ensure changes made to
menu settings are saved appropriately.
• You can power on/off the product from the main power source by enabling [Start on
AC] under the [System] menu.
1. Make sure that the product is in Offline mode before you power off.
If "Online" appears on the screen, press the button to change to Offline mode.
68
Powering Off the Product