SATO CL4NX Plus Operator's Manual page 288

Hide thumbs Also See for CL4NX Plus:

Table of Contents

This setting is disabled when AEP mode is enabled.

Set the port number of Port3.

For the one-port connection of Status3/Status4/Status5, this port is used for both receiving print data

and returning the product status.

The setting range is from 1 to 65535.

Each port (1, 2 and 3) must be set to different values.

Set a port number not used by other services. If port numbers that overlap with those

used by other services are used, communication cannot be performed properly.

You can change the return status format of port3 to Compatible mode by enabling

[Legacy Status for Port 9100].

[Flow Control]

Set the communication protocol.

The options are as follows: