Table of Contents
Advertisement
3.
Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys
to select the option you want, then press enter. To return to the Computer Setup Utilities menu, press
esc.
4.
To apply and save changes, select Main > Save Changes and Exit.
●
If you have made changes that you do not want applied, select Ignore Changes and Exit.
●
To restore settings from the Advanced and Main menus to original values, select Apply Factory
Defaults and Exit.
●
To restore settings from the Advanced and Main menus to those previously saved by Save Custom
Defaults, select Apply Custom Defaults and Exit. If no custom defaults have been saved, then
factory defaults are used.
NOTE:
Restore Security Settings to Factory Defaults at the bottom of the Security menu.
NOTE:
IMPORTANT:
changes because the settings could become corrupted. It is safe to turn off the computer only after exiting
the F10 Setup screen.
60
Chapter 5 Computer Setup (F10) Utility
Settings in the Security menu are not modified by Apply Defaults. Those values are reset by
Not all settings shown in the following sections are available for all models.
Do not turn the computer power off while the BIOS is saving the Computer Setup (F10)
Hide quick links:
Advertisement
Table of Contents
