Table of Contents
Advertisement
Table 5-2
Computer Setup—Security (continued)
Option
Change BIOS
Administrator Password
Create POST Power-On
Password
Change POST Power-On
Password
(This selection is active
only if a POST Power-on
password is set.)
Password Policies
Administrator
Authentication Policies
Security Configuration
64
Chapter 5 Computer Setup (F10) Utility
Description
WMI commands that change system settings
●
●
BIOS Configuration Utility (BCU)
Alternative power-on password
●
NOTE:
Creating a BIOS user disables the Fast Boot option.
NOTE:
If the password is set, it is required to change Computer Setup options, update the BIOS, and
make changes to certain plug and play settings under Windows.
Lets you change the BIOS administrator password.
You must know the current password to be able to change it.
Lets you set and enable a POST power-on password. The power-on password prompt appears after a
power cycle or reboot. If the user does not enter the correct power-on password, the unit will not boot.
NOTE:
The administrator password might be used at the power-on password prompt.
Lets you change the POST power-on password.
You must know the current password to be able to change it.
Let you set the guidelines for a valid password. Options include:
Password minimum length
●
●
Requires at least one symbol
Requires at least one number
●
●
Requires at least one upper case character
Requires at least one lower case character
●
●
Allow spaces
Clear Password Jumper
Select Honor to allow or Ignore to not allow the absence of the password jumper to clear the passwords at
boot up. Default is Honor.
Select to require Administrator authentication for various commands during boot, including F9 (Boot
Menu), F11 (System Recovery), F12 (Network Boot), capsule update, and power-on.
TPM Embedded Security
●
TPM Specification Version
Displays the current TPM version.
TPM Device
●
Lets you set the Trusted Platform Module as available or hidden.
TPM State
●
Select to enable the TPM.
●
ClearTPM
Select to reset the TPM to an unowned state. After the TPM is cleared, it is also turned off. To
temporarily suspend TPM operations, turn the TPM off instead of clearing it.
Hide quick links:
Advertisement
Table of Contents
