M10 AT Commands Set
See Write Command
Test Command
Response
AT+QSIDET=?
+QSIDET: (<gainlevel>)
OK
Parameter
See Write Command
Write Command
Response
AT+QSIDET=<
OK
gainlevel >
ERROR
Parameter
< gainlevel > int: 0 – 255
Reference
Note
6.2.3 AT+QPOWD Power Off
AT+QPOWD
Power Off
Write Command
Response
AT+QPOWD
=
Parameter
<n>
<n>
DOWN)
Reference
Note
6.2.4 AT+QTRPIN Times Remain To Input SIM PIN/PUK
AT+QTRPIN
Times Remain To Input SIM PIN/PUK
Execution
Response
Command
Times remain to input SIM PIN
AT+QTRPIN
+QTRPIN: <chv1>,<chv2>,<puk1>,<puk2>
OK
Parameters
<chv1>Times remain to input chv1
<chv2>Times remain to input chv2
<puk1>Times remain to input puk1
<puk2>Times remain to input puk2
Reference
Note
6.2.5 AT+QMIC Change The Microphone Gain Level
AT+QMIC Change The Microphone Gain Level
M10_ATC_V1.01
<gainlevel> value is related to channel specific.
0
Power off urgently ( Will not send out NORMAL POWER
DOWN)
1
Normal power off (Will send out NORMAL POWER
- 117 -