At+Csms Select Message Service - Quectel M10 At Command Set

M10 AT Commands Set
AT+CSMP=?
+CSMP: (list of supported <fo>s),(list of supported <vp>s), (list of
supported <pid>s), (list of supported <dcs>s)
OK
Parameters
see Write Command
Write Command Response
AT+CSMP=[<fo TA selects values for additional parameters needed when SM is sent to the
>[<vp>[,pid>[,<d network or placed in a storage when text mode is selected (+CMGF=1). It is
cs>]]]] possible to set the validity period starting from when the SM is received by
the SMSC (<vp> is in range 0... 255) or define the absolute time of the
validity period termination (<vp> is a string).
Note: The Command writes the parameters in NON-VOLATILE memory.
OK
Parameters
<fo>
<vp>
<pid>
<dcs>
Reference Note
GSM 07.05

4.2.17 AT+CSMS Select Message Service

AT+CSMS Select Message Service
Read Command Response
AT+CSMS? +CSMS: <service>,<mt>,<mo>,<bm>
OK
Parameters
see Write Command
Test Command Response
+CSMS: (list of supported <service>s)
AT+CSMS=?
M10_ATC_V1.01
depending on the Command or result code: first octet
of GSM 03.40 SMS-DELIVER, SMS-SUBMIT
(default 17), SMS-STATUS-REPORT, or
SMS-COMMAND (default 2) in integer format. SMS
status report is supported under text mode if <fo> is set
to 49.
depending on SMS-SUBMIT <fo> setting: GSM 03.40
TP-Validity-Period either in integer format (default
167) or in time-string format (refer <dt>)
GSM 03.40 TP-Protocol-Identifier in integer format
(default 0).
GSM 03.38 SMS Data Coding Scheme in Integer
format.
- 104 -