Table of Contents
Advertisement
Quick Links
Park
Installation Instructions
Index
Kit of Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Planter Assembly, NAHP/NALP . . . . . . . . . . . . . . . . . . . .3
Worksurface Attachment
General, NARC, NAPWT, NA4828RB, NA4815RB . . . . . 4
Layered Coffee, NALC . . . . . . . . . . . . . . . . . . . . .4
Electrical Attachment . . . . . . . . . . . . . . . . . . . . . . . . . .5
Fastener Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Page 1 of 5
Allsteel Inc.
Muscatine, Iowa 52761-0071
www.allsteeloffice.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Allsteel Park Series
Summary of Contents for Allsteel Park Series
-
Page 1: Installation Instructions
Electrical Attachment ......5 Fastener Chart ......5 Allsteel Inc. Muscatine, Iowa 52761-0071 www.allsteeloffice.com... - Page 2 Park Installation Packet W A R N I N G Failure to install product as instructed, use of hardware other than that which is provided, or failure to comply with instructions can result in product failure, personal injury, or property damage. Illustration 1: Kit of Parts NALPB Planter Trough...
- Page 3 Park Installation Packet Create Illustration 2: Planter Assembly - NAHP/NALP Step 1 - Place the Planter Trough inverted on a clean, dry surface and place the base on top of the Planter Trough. Step 2 - Align the large oval holes on the top crossbars of the frame with the threaded attachment and secure with 4 A screws.
- Page 4 Park Installation Packet Illustration 6a: Worksurface Attachment - NARC, NA4828RB, NA4815RB, NAPWT Step 1 - Place worksurface topside down on a clean, dry surface. Place base on top. Step 2 - Align holes on attachment plates or tube with pilot holes on the underside of the worksurface. Use B screws to attach base to worksurface.
- Page 5 Park Installation Packet Create Illustration 7: Electrical Attachment, NALC - Optional Step 1 - Determine desired locations for the slide mount on the underside of the worksurfaces. Reference images below for suggested locations. Step 2 - Install slide mount to the underside of the worksurface with given hardware and insert Minitap. Use Cable Management Straps (C) to secure excess cord to frame.
Need help?
Do you have a question about the Park Series and is the answer not in the manual?
Questions and answers