Powering The Router On/Off - Juniper SRX5600 Installation And Initial Configuration Manual

Powering the Router On/Off

For each power supply on a DC-powered SRX5800, verify that the source power cables
are connected to the appropriate terminal: the positive (+) source cable to the return
terminal (labeled RETURN) and the negative (–) source cable to the input terminal terminal (labeled RETURN) and the negati e ( ) so rce cable to the inp t terminal
(labeled –48V).
• Verify that an external management device is connected to one of the Routing Engine
ports on the Craft Interface (AUX, CONSOLE, or ETHERNET).
• Turn on the power to the external management device.
© 2010 Juniper Networks, Inc. All rights reserved.
CONFIDENTIAL
www.juniper.net | 50
FSSSRX5800