Installing the SRX5800 Services Gateway Using a Mechanical Lift
• Install a mounting screw into each of the open mounting holes aligned with the rack,
starting from the bottom.
• Visually inspect the alignment of the SRX5800. If the SRX5800 is installed properly in
the rack, all the mounting screws on one side of the rack should be aligned with the
mounting screws on the opposite side, and the SRX5800 should be level.
© 2010 Juniper Networks, Inc. All rights reserved.
CONFIDENTIAL
www.juniper.net | 31
FSSSRX5800