7.6. Front Panel Pin Header (FP1)
The front panel pin header provides audio output (Line-Out), microphone (Mic-In), USB 2.0 (2 ports), power switch,
power LED, storage LED, reset switch signals through the pin header FP1. The audio output signals are shared with
those of the speaker connectors CN18 & CN21.
Figure 19: Front Panel Pin Header FP1
Table 24: Pin Assignment FP1
Pin
Signal
1
Vbus_A
2
Vbus_B
3
USB_A_D-
4
USB_B_D-
5
USB_A_D+
6
USB_B_D+
7
GND
8
GND
9
Key
10
Line2_L
11
HDD_LED+
12
Power_LED+
13
HDD_LED-
14
Power_LED-
15
Reset_SW-(GND)
16
Power_SW+
17
Reset_SW+
18
Power_SW-(GND)
19
+3.3VA
20
Line2_R
21
GND
22
GND
23
MIC2_L
24
MIC2_R
www.kontron.com
Description
USB 2.0 Port A cable bus power
USB 2.0 Port B cable bus power
USB 2.0 differential pair (-), Port A
USB 2.0 differential pair (-), Port B
USB 2.0 differential pair (+), Port A
USB 2.0 differential pair (+), Port B
Ground
Ground
Second Line-out jack, left channel
Hard disk drive activity LED (+)
System power LED (+)
Hard disk drive activity LED (-)
System power LED (-)
Reset switch (-)
System power switch (+)
Reset switch (+)
System power switch (-)
3.3 V power supply
Second Line-out jack, right channel
Ground
Ground
Second Mic-in jack, left channel
Second Mic-in jack, right channel
mITX-VR1000 - User Guide, Rev. 0.0
// 38